MCP73123-22SI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated | 3.618V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73123 |
| Pin Count | 10 |
| Output Voltage | 3.6V |
| Max Output Current | 1.1A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 700μA |
| Output Current | 1.1A |
| Adjustable Threshold | NO |
| Max Output Voltage | 3.618V |
| Max Input Voltage | 18V |
| Nominal Input Voltage | 4V |
| Min Output Voltage | 3.582V |
| Fault Protection | Over Temperature, Over Voltage, Reverse Current |
| Battery Chemistry | Lithium Iron Phosphate |
| Number of Cells | 1 |
| Drain to Source Resistance | 350mOhm |
| Voltage - Supply (Max) | 16V |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Height | 880μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73123-22SI/MF Overview
It comes in the package?of a Tube. There is currently a package available named 10-VFDFN Exposed Pad.This device is mounted using type Surface Mount.The temperature should be set to -40°C~85°C TA to ensure reliable performance.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.For the device to be charged, there is Constant - Programmable current required.According to the base part number MCP73123, its related parts can be found.In general, the number of terminations found within it is 10 as a whole.There are 10 pins on the circuit board.Programmable features, such as Current, Timer, are available.During the installation process, this product requires the connection of 10 pins.The system currently provides 1 channels for the user to use.Devices with 16V maximum supply voltages are recommended.In theory, it should be able to run on a battery that has a voltage of 4.6VV.It is crucial that the supply voltage of the device does not exceed 6.5V for the device to work properly.In the case of 3.6V, the output voltage is likely to produce high efficiency.With a 1.1A output current, the operation is conducted.There is a subcategory of Power Management Circuits for this device.Using a supply voltage as low as 4.2V will allow it to function.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.The part's power supply is set to 5V.A 700μA supply current is set on the gadget.This device can accept up to 18V volts of input voltage.It is mandatory to set the voltage at 3.618V for the maximum output supply voltage for this operation.It is possible to reduce the maximum output current to 1.1A when the operation is in progress.
MCP73123-22SI/MF Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73123-22SI/MF Applications
There are a lot of Microchip Technology MCP73123-22SI/MF Battery Chargers ICs applications.
- Portable devices
- Battery backup applications
- Electrical Utility industry
- Electronic dictionary
- Solar charging
- Instruments and meters
- Industrial
- Cellphones
- Pallet jacks
- Smart power strips
