MCP73213-A6SI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated | 8.85V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 9.4V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73213 |
| Pin Count | 10 |
| Output Voltage | 8.4V |
| Max Output Current | 1.1A |
| Power Supplies | 4/16V |
| Number of Channels | 2 |
| Max Supply Voltage | 13V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 700μA |
| Adjustable Threshold | YES |
| Max Output Voltage | 8.85V |
| Max Input Voltage | 18V |
| Supply Current-Max (Isup) | 1.5mA |
| Nominal Input Voltage | 4V |
| Min Output Voltage | 8.15V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 2 |
| Drain to Source Resistance | 350mOhm |
| Current - Charging | Constant - Programmable |
| Height | 939.8μm |
| Length | 2.9972mm |
| Width | 2.9972mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73213-A6SI/MF Overview
The package Tube contains it, and you can find it there.Among the packages that come with this product, there is one that is 10-VFDFN Exposed Pad.In this case, the device has a mounting type of Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.For the device to be charged, there is Constant - Programmable current required.The base part number MCP73213 represents its related parts.It contains 10 terminations, so that is how many there are.In total, it has 10 pins.The operation?are 10 pins.Currently, there are 2 available channels.It should be possible to run it from a 9.4V battery it should be able to run at all times.With a 13V supply voltage, it is capable of withstanding the operation of the device.Using a 8.4V output voltage results in high efficiency.There is a subcategory of Power Management Circuits for this device.A supply voltage of 4.2V is suitable for it, because it can operate with a low supply voltage.In order to mount it, it has to align itself with Surface Mount.It is configured to be 1.5mA for Vsup (maximum supply voltage).The part's power supply is set to a value of 4/16V.Its supply carries 700μA current.18V is the maximum input voltage it can handle.In order for the operation to be carried out successfully, a maximum output supply voltage of 8.85V is required.There is a reduction in the maximum output current during operation to 1.1A.
MCP73213-A6SI/MF Features
2 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73213-A6SI/MF Applications
There are a lot of Microchip Technology MCP73213-A6SI/MF Battery Chargers ICs applications.
- Energy harvesting
- Electric lift car
- Ruggedized notebooks/tablet computers
- Smart speakers
- Material handling
- Electric pallet truck
- Embedded automotive applications
- Power tools
- Portable speaker systems
- MP3, MP4 player
