MCP73213-B6SI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated | 8.85V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 9.4V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73213 |
| Pin Count | 10 |
| Output Voltage | 8.2V |
| Max Output Current | 1.1A |
| Power Supplies | 4/16V |
| Number of Channels | 2 |
| Max Supply Voltage | 13V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 700μA |
| Adjustable Threshold | YES |
| Max Output Voltage | 8.85V |
| Max Input Voltage | 18V |
| Supply Current-Max (Isup) | 1.5mA |
| Nominal Input Voltage | 4V |
| Min Output Voltage | 8.15V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 2 |
| Drain to Source Resistance | 350mOhm |
| Current - Charging | Constant - Programmable |
| Height | 939.8μm |
| Length | 2.9972mm |
| Width | 2.9972mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73213-B6SI/MF Overview
This item can be found in the Tube package.With this item, there is a 10-VFDFN Exposed Pad package that comes with it.Amounting type Surface Mount is the one associated with the device.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.There is an analog IC of POWER SUPPLY SUPPORT CIRCUIT used in this device.Charge the device with Constant - Programmable current.It is possible to find related parts of this device by using the base part number MCP73213.It has 10 terminations.With 10 pins on it, it has a very simple design.There are 10 pins required in order for the product to function.A total of 2 channels are available.Using a 9.4V battery should be enough to run it.It is capable of withstanding a 13V supply voltage.It is possible to achieve optimum efficiency in the case of a given output voltage of 8.2V.There is one subcategory of this device, and it is Power Management Circuits.It can function at as low a supply voltage as possible, such as 4.2V.As far as the mounting is concerned, it is mounted in the way of Surface Mount.1.5mA is set for Vsup (maximum supply voltage).The part's power supply is set to a value of 4/16V.The gadget's supply current is set to 700μA.18V is the maximum input voltage it can handle.To fulfill the operation requirements, the maximum output supply voltage is reduced to 8.85V.During operation, the maximum output current is reduced to 1.1A.
MCP73213-B6SI/MF Features
2 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73213-B6SI/MF Applications
There are a lot of Microchip Technology MCP73213-B6SI/MF Battery Chargers ICs applications.
- Smart speakers
- Remote sensor
- Electronic dictionary
- Electric vehicles
- Laptops
- High end, feature-rich consumer
- Model aircraft
- Electrical Utility industry
- Instruments and meters
- Trash compactors
