MCP73223-C2SI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated | 7.243V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73223 |
| Pin Count | 10 |
| Output Voltage | 7.2V |
| Max Output Current | 1.1A |
| Number of Channels | 1 |
| Max Supply Voltage | 13V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 700μA |
| Output Current | 1.1A |
| Adjustable Threshold | NO |
| Max Output Voltage | 7.243V |
| Max Input Voltage | 18V |
| Nominal Input Voltage | 4V |
| Min Output Voltage | 7.157V |
| Fault Protection | Over Temperature, Over Voltage, Reverse Current |
| Battery Chemistry | Lithium Iron Phosphate |
| Number of Cells | 1 ~ 2 |
| Drain to Source Resistance | 350mOhm |
| Voltage - Supply (Max) | 16V |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Height | 939.8μm |
| Length | 2.9972mm |
| Width | 2.9972mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73223-C2SI/MF Overview
There is an Tube package that contains it. For convenience, it is included in the 10-VFDFN Exposed Pad package.Mounting type Surface Mount matches the device.The correct temperature setting is -40°C~85°C TA.The functionality of this device is provided by an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.Parts related to the base part number MCP73223 can be found based on that number.In total, there are 10 terminations.It has a total of 10 pins on it.It is possible to program features such as Current, Timer.There are 10 pins necessary to make it work.Currently, there are 1 available channels.Those devices that have a maximum supply voltage of 16V are recommended for use.In order to run it, you would need a battery with 4.6V.An input voltage that is equal to 13V can be applied to it without any problem.The 7.2V output voltage allows for high efficiency.In order to operate, it must have a current of 1.1A at the output.This device belongs to the subcategory of Power Management Circuits.A power supply voltage as low as 4.2V can be used for it and it will work as well as possible.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.A 700μA supply current is set on the gadget.This device can accept up to 18V volts of input voltage.The maximum output supply voltage is reduced to 7.243V to fulfill the operation requirements.A reduction in maximum output current to 1.1A occurs during operation.
MCP73223-C2SI/MF Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73223-C2SI/MF Applications
There are a lot of Microchip Technology MCP73223-C2SI/MF Battery Chargers ICs applications.
- Floor scrubber
- Remote control toys
- Maintenance shops
- Emergency/Security
- Electric boat
- Battery backup applications
- GPS portable devices
- Man lift
- Material handling
- PDAs
