MCP73811T-420I/OT
| Parameters | |
|---|---|
| Output Current | 450mA |
| Adjustable Threshold | NO |
| Max Output Voltage | 4.2V |
| Max Input Voltage | 7V |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Drain to Source Resistance | 400mOhm |
| Current - Charging | Constant |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated | 4.2V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73811 |
| Pin Count | 5 |
| Output Voltage | 4.2V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 1mA |
MCP73811T-420I/OT Overview
It is contained in the package Tape & Reel (TR).It is contained in a package named SC-74A, SOT-753.This device is mounted using type Surface Mount.A temperature setting of -40°C~85°C TA would be the best thing to do.The functionality of this device is provided by an analog IC called POWER SUPPLY SUPPORT CIRCUIT.It is necessary to supply the device with Constant current in order to charge it.Parts related to the base part number MCP73811 can be found based on that number.As far as the terminations are concerned, there are 5.A total of 5 pins are present on it.There are 5 pins necessary to make it work.The system currently provides 1 channels for the user to use.It should be possible to run it from a 5.2V battery it should be able to run at all times.In order for the device to operate properly, the supply voltage should not exceed 6V.The possibility of optimal efficiency exists if 4.2V output voltage is used as the output voltage.A 450mA output current is used for operation.This device belongs to the subcategory of Power Management Circuits.Using a supply voltage as low as 3.75V will allow it to function.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.5V is the power supply setting for the part.Current is flowing through the gadget's supply at 1mA volts.7V is the maximum input voltage it can handle.It is mandatory to set the voltage at 4.2V for the maximum output supply voltage for this operation.
MCP73811T-420I/OT Features
1 channels
Power Management Circuits subcategory
SC-74A, SOT-753 package
MCP73811T-420I/OT Applications
There are a lot of Microchip Technology MCP73811T-420I/OT Battery Chargers ICs applications.
- Painting boat
- Portable medical instruments
- Material handling
- Remote sensor
- Model aircraft
- TV sticks
- Automotive electronics
- Energy harvesting
- Home routers
- Electric vehicles
