MCP73812T-420I/OT
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 1mA |
| Output Current | 500mA |
| Adjustable Threshold | NO |
| Max Output Voltage | 4.2V |
| Max Input Voltage | 6V |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 200.998119mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73812 |
| Pin Count | 5 |
| Output Voltage | 4.2V |
| Max Output Current | 500mA |
| Power Supplies | 5V |
MCP73812T-420I/OT Overview
It is available in the package Tape & Reel (TR).There is a SC-74A, SOT-753 package that comes with this item.There is a type of mounting for this device: Surface Mount.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.The device needs to be charged at a current of Constant - Programmable in order to function.The related parts of the base part number MCP73812 can be found by following the order of the base part number.There are 5 terminations in it.The device is equipped with a total of 5 pins.In order for the product to be functional, it requires that you connect the 5 pins according to the instructions.The number of available channels is 1.It should be able to run off of a 5.2V battery.If the supply voltage exceeds 6V, the device will not function properly.As long as the output voltage is set to 4.2V, then there is a possibility of optimal efficiency being achieved.Operation is achieved by providing a 500mA output current.Subcategory 0 is home to this device.Using a supply voltage as low as 3.75V will allow it to function.As far as the mounting is concerned, it is mounted in the way of Surface Mount.With respect to the power supply for the part, it is set to 5V.It appears that there is 1mA current flowing through the supply of the gadget at the moment.It can accept a maximum input voltage of 6V volts.It is important to note that the maximum output supply voltage for this operation must be set to 4.2V.To meet operation conditions, the maximum output current is reduced to 500mA.
MCP73812T-420I/OT Features
1 channels
Power Management Circuits subcategory
SC-74A, SOT-753 package
MCP73812T-420I/OT Applications
There are a lot of Microchip Technology MCP73812T-420I/OT Battery Chargers ICs applications.
- Industrial lighting
- Home appliances
- Marine buoy lights
- Portable devices
- Electric tour bus
- Mobile lighting
- Conventional charge
- Various chargers
- Tablets
- Maintenance shops
