MCP73831T-2ACI/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 200.998119mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Voltage - Rated | 4.534V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.54W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73831 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 4.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 500mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.5V |
| Max Input Voltage | 6V |
| Nominal Input Voltage | 6V |
| Min Output Voltage | 4.168V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Drain to Source Resistance | 350mOhm |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 500mA |
| Height | 1.2954mm |
| Length | 3.0988mm |
| Width | 1.8034mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73831T-2ACI/OT Overview
There is a package Tape & Reel (TR) available.For convenience, it is included in the SC-74A, SOT-753 package.This device is mounted using type Surface Mount.The best thing to do is to set the temperature to -40°C~85°C TA.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.The device needs to be charged at a current of Constant - Programmable in order to function.If you use the base part number MCP73831, you can look for related parts.I have found that the number of terminations found in it as a whole is 5.The device is equipped with a total of 5 pins.Features such as Current are programmable.On the device, there is 500mA maximum charging current listed.Product functionality is dependent on 5 pins.It is possible to access 1 channels.In theory, it should be able to run on a battery that has a voltage of 5.2VV.An input voltage that is equal to 6V can be applied to it without any problem.As long as the output voltage is set to 4.2V, then there is a possibility of optimal efficiency being achieved.A device of this type will have its output current set to 500mA in this case.Devices in this category are classified as Power Management Circuits.The device can operate at a voltage of 3.75V as low as possible.It is mounted in the same way as Surface Mount.6V is the maximum input voltage it can handle.It is mandatory to set the voltage at 4.5V for the maximum output supply voltage for this operation.
MCP73831T-2ACI/OT Features
1 channels
Power Management Circuits subcategory
SC-74A, SOT-753 package
MCP73831T-2ACI/OT Applications
There are a lot of Microchip Technology MCP73831T-2ACI/OT Battery Chargers ICs applications.
- Emergency/Security
- Golf carts
- Conventional charge
- Pallet jacks
- Battery backup applications
- Automotive electronics
- Electric pallet truck
- Electrical Utility industry
- Floor scrubber
- Laptops
