MCP73833-AMI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
| Pin Count | 10 |
| Output Voltage | 4.5V |
| Max Output Current | 1A |
| Power Supplies | 3.8/5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.533V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 6V |
| Min Output Voltage | 4.168V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73833-AMI/MF Overview
You can find it in the Tube package.In order to make it more convenient, it has been included in the 10-VFDFN Exposed Pad package.In this case, the device has a mounting type of Surface Mount.A temperature setting of -40°C~85°C TA would be the best thing to do.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.The device requires Constant - Programmable of current to charge.This device's related parts can be found under the base part number MCP73833.A total of 10 terminations can be found in it.A battery pack is going to have a voltage of 4.2V.In total, it has 10 pins.In addition to Current, a variety of programmable features are available.It is rated at 1.1A at maximum charging current.In order for the product to be functional, it requires that you connect the 10 pins according to the instructions.In total, this application supports 1 channels.The battery would need to have a voltage of 5.2V for the device to work.As long as the supply voltage is 6V, it is capable of withstanding the voltage.When the output voltage is 4.5V, high efficiency is possible.A 1.2A output current is used for operation.The device falls under the Power Management Circuits subcategory.This device can work at as low a voltage as possible, such as 3.75V.Aligning it with Surface Mount is required for mounting.In most cases, the maximum supply voltage (Vsup) is set to 3mA.There is 3.8/5.5V power supply set for the part.It is important to note that the maximum output supply voltage for this operation must be set to 4.533V.It is important to note that during operation, the maximum output current is reduced to 1A.
MCP73833-AMI/MF Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73833-AMI/MF Applications
There are a lot of Microchip Technology MCP73833-AMI/MF Battery Chargers ICs applications.
- TV sticks
- Wearables
- Industrial
- Boat
- Ruggedized notebooks/tablet computers
- Battery backup applications
- Drone
- Home routers
- Various chargers
- PDAs
