MCP73833-AMI/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated | 4.533V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 4.5V |
| Power Supplies | 3.8/5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation | 1.54W |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.533V |
| Max Input Voltage | 7V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 6V |
| Min Output Voltage | 4.168V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Drain to Source Resistance | 300mOhm |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Height | 939.8μm |
| Length | 2.9972mm |
| Width | 2.9972mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73833-AMI/UN Overview
This can be found in the Tube package.The package that is included with it comes in the shape of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).There is a mounting type Surface Mount specified for the device.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.In order for the device to function, an analog IC named POWER SUPPLY SUPPORT CIRCUIT must be used.The device cannot be charged without Constant - Programmable current flowing through it.A list of related parts can be found by searching for the base part number MCP73833.The overall number of terminations that can be found in it is 10 as a whole.There is 4.2V voltage in the battery pack.There are 10 pins on it.You can program a number of features, including Current.According to the manufacturer, it is rated at 1.1A at maximum charging current.There are 10 pins necessary to make it work.In total, this application supports 1 channels.Batteries with a 5.2V voltage are compatible with it.With a 6V supply voltage, it is capable of withstanding the operation of the device.When the output voltage is 4.5V, high efficiency is possible.The operation is carried out with an output current of 1.2A.Subcategory 0 is home to this device.This device can work at as low a voltage as possible, such as 3.75V.A mounting requires that it align itself with Surface Mount.Vsup (maximum supply voltage) is set in the command to 3mA.With respect to the power supply for the part, it is set to 3.8/5.5V.The maximum input voltage is 7V volts.To fulfill the operation requirements, the maximum output supply voltage is reduced to 4.533V.
MCP73833-AMI/UN Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73833-AMI/UN Applications
There are a lot of Microchip Technology MCP73833-AMI/UN Battery Chargers ICs applications.
- Solar charging
- Ruggedized notebooks/tablet computers
- Mobile router
- GPS tracker
- Electricity bank
- GPS portable devices
- Portable speaker systems
- Personnel carriers
- Drone
- Battery backup applications
