MCP73833-BZI/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
| Output Voltage | 4.5V |
| Max Output Current | 1A |
| Power Supplies | 3.8/5.5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Operating Supply Current | 2mA |
| Output Current | 1.2A |
| Max Output Voltage | 4.533V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 6V |
| Min Output Voltage | 4.168V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73833-BZI/UN Overview
This can be found in the Tube package.To make it easier for you, it is included with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.Mounting type is Surface Mount.The correct temperature setting is -40°C~85°C TA.To charge the device, you need Constant - Programmable current.With the base part number MCP73833, it is possible to find related parts.As far as the terminations are concerned, there are 10.It is set to 4.2V for the battery pack.Serveral programmable features like Current.With maximum charging current, its rating is 1.1A.It is necessary to connect the 10 pins during the installation process of this product.With a 6V supply voltage, it is capable of withstanding the operation of the device.As long as the output voltage is set to 4.5V, then there is a possibility of optimal efficiency being achieved.There is 1.2A output current when the device operates.There is one subcategory of this device, and it is Power Management Circuits.Using a supply voltage as low as 3.75V will allow it to function.It is mounted in the same way as Surface Mount.It is configured to be 3mA for Vsup (maximum supply voltage).There is 3.8/5.5V power supply set for the part.There is 2mA current flowing through the gadget's supply.To fulfill the operation requirements, the maximum output supply voltage is reduced to 4.533V.There is a reduction in the maximum output current during operation to 1A.
MCP73833-BZI/UN Features
Battery pack voltage of 4.2V
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73833-BZI/UN Applications
There are a lot of Microchip Technology MCP73833-BZI/UN Battery Chargers ICs applications.
- Solar charging
- Military equipment
- Electric pallet truck
- Home routers
- Laptops
- Mobile router
- Wireless headphones
- Cellphones
- Instruments and meters
- Boat
