MCP73833-CNI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
| Pin Count | 10 |
| Output Voltage | 4.5V |
| Power Supplies | 3.8/5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 3mA |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73833-CNI/MF Overview
It is included in the Tube package. Located in package 10-VFDFN Exposed Pad, it can be found there.There is a mounting type Surface Mount specified for the device.Keeping the temperature at -40°C~85°C TA is the right choice.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.For the device to be charged, there is Constant - Programmable current required.Identify its related parts based on the base part number MCP73833.I have found that the number of terminations found in it as a whole is 10.There is a voltage of 4.2V for the battery pack as well.With 10 pins on it, it has a very simple design.In addition to Current, there are several other programmable options.In terms of maximum charging current, it is rated at 1.1A.The product is able to function with the help of 10 pins that are required.Currently, there are a total of 1 channels available for use in the application.This should be able to operate off of a battery that has a voltage of 5.2V.To ensure the device works properly, the supply voltage should not exceed 6V.In the case of 4.5V output voltage, there is a possibility of optimal efficiency.With an output current of 0, the operation is carried out.The device falls under the Power Management Circuits subcategory.A supply voltage of 3.75V is suitable for it, because it can operate with a low supply voltage.Aligning it with Surface Mount is required for mounting.It was determined during the design process that Vsup (maximum supply voltage) should be set to 3mA.3.8/5.5V is the power supply setting for the part.
MCP73833-CNI/MF Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73833-CNI/MF Applications
There are a lot of Microchip Technology MCP73833-CNI/MF Battery Chargers ICs applications.
- Drone
- Electric lift car
- Various chargers
- Portable speaker systems
- GPS portable devices
- Energy harvesting
- Automotive/electrical vehicle
- Locomotive
- TV sticks
- Solar charging
