MCP73833-FCI/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
| Pin Count | 10 |
| Output Voltage | 4.533V |
| Power Supplies | 3.8/5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.533V |
| Max Input Voltage | 7V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 6V |
| Min Output Voltage | 4.168V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73833-FCI/UN Overview
The package that has it is the Tube package.Located in package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), it can be found there.Surface Mount is the mounting type of the device.The correct temperature setting is -40°C~85°C TA.In order for this device to function, it utilizes an analog integrated circuit called POWER SUPPLY SUPPORT CIRCUIT.In order to charge the device, it needs to receive Constant - Programmable current.The base part number MCP73833 can be used to locate related parts for this device.I have found that the number of terminations found in it as a whole is 10.Battery pack voltage is 4.2V.There are 10 pins on the circuit board.Serveral programmable features like Current.On the device, there is 1.1A maximum charging current listed.You need 10 pins for it to work.Currently, there are 1 channels available.This should be able to operate off of a battery that has a voltage of 5.2V.With a 6V supply voltage, it is capable of withstanding the operation of the device.When the output voltage is 4.533V, high efficiency is possible.In order to operate, an output current of 1.2A is used.Subcategory 0 is home to this device.A power supply voltage as low as 3.75V can be used for it and it will work as well as possible.A mounting requires that it align itself with Surface Mount.It is set to 3mA for Vsup (maximum supply voltage).A power supply setting of 0 has been assigned to the part.This device can accept up to 7V volts of input voltage.Voltage 4.533V is the maximum output voltage needed for this operation.
MCP73833-FCI/UN Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73833-FCI/UN Applications
There are a lot of Microchip Technology MCP73833-FCI/UN Battery Chargers ICs applications.
- Charging cradle for wearable devices
- Electricity bank
- Portable medical instruments
- GPS tracker
- Automotive battery charger circuits
- Pallet jacks
- Drone
- Automotive/electrical vehicle
- Embedded automotive applications
- Fast charge
