MCP73833-GPI/MF
| Parameters | |
|---|---|
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 3mA |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Power Supplies | 3.8/5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
MCP73833-GPI/MF Overview
It is included in the Tube package. The product comes in the package of a 10-VFDFN Exposed Pad.Amounting type Surface Mount is the one associated with the device.The temperature should be set to -40°C~85°C TA to ensure reliable performance.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.The device cannot be charged without Constant - Programmable current flowing through it.Based on the base part number MCP73833, its related parts can be identified.The number of terminations found in it is 10 as a whole.There are 10 pins on the circuit board.Current are a programmable feature.On the device, it is listed as having a charge current of 1.1A.In order for the product to function as intended, there are 10 pins that must be connected.Currently, there are 1 channels available.If it runs off of a 5.2V battery, then it should be able to run continuously.It is important that the supply voltage does not exceed 6V for the device to work properly.The possibility of optimal efficiency exists if 4.2V output voltage is used as the output voltage.The operation is carried out with an output current of 1.2A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.A supply voltage of 3.75V is suitable for it, because it can operate with a low supply voltage.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.During the design process, Vsup (maximum supply voltage) was set to 3mA.It is set to 3.8/5.5V when it comes to the power supply for the part.There is 2mA current flowing through the gadget's supply.
MCP73833-GPI/MF Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73833-GPI/MF Applications
There are a lot of Microchip Technology MCP73833-GPI/MF Battery Chargers ICs applications.
- Fast charge
- Drone
- Boat
- Laptops
- Wireless headphones
- Battery backup applications
- USB power delivery (USB-C) devices
- Smart cameras
- Various chargers
- MP3, MP4 player
