MCP73833-GPI/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
| Output Voltage | 4.5V |
| Max Output Current | 1A |
| Power Supplies | 3.8/5.5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Output Current | 1.2A |
| Max Output Voltage | 4.533V |
| Supply Current-Max (Isup) | 3mA |
| Min Output Voltage | 4.168V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP73833-GPI/UN Overview
It is contained in the package Tube.The product comes in the package of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).Device mounting type Surface Mount is specified.A temperature setting of -40°C~85°C TA would be the best thing to do.If the device needs to be charged, it must be supplied with Constant - Programmable current.Based on the base part number MCP73833, its related parts can be identified.The overall number of terminations that can be found in it is 10 as a whole.There is a setting of 4.2V for the battery pack.It is possible to program features such as Current.A maximum charging current of 1.1A is recommended.In order for it to work, it requires 10 pins.If the supply voltage exceeds 6V, the device will not function properly.Having the output voltage set to 4.5V may result in high efficiency.The operation is performed with an output current of 1.2A.Devices belonging to subcategory Power Management Circuits include this device.A supply voltage of 3.75V is suitable for it, because it can operate with a low supply voltage.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 3mA.Regarding the power supply for the part, it is set to 3.8/5.5V.There is 2mA current flowing through the gadget's supply.As a maximum output supply voltage for this operation, the voltage must be set to 4.533V.It is possible to reduce the maximum output current to 1A when the operation is in progress.
MCP73833-GPI/UN Features
Battery pack voltage of 4.2V
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73833-GPI/UN Applications
There are a lot of Microchip Technology MCP73833-GPI/UN Battery Chargers ICs applications.
- Electronic dictionary
- Model aircraft
- Smart speakers
- Wireless power
- Robot
- Pallet jacks
- Smart power strips
- Instruments and meters
- Electric pallet truck
- GPS tracker
