MCP73833T-CNI/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
| Output Voltage | 4.5V |
| Power Supplies | 3.8/5.5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Output Current | 1.2A |
| Supply Current-Max (Isup) | 3mA |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73833T-CNI/UN Overview
This item can be found in the Tape & Reel (TR) package.In the package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), there is a version of it.In this case, the device is mounted in the way of Surface Mount.Ensure reliable performance by setting the temperature to -40°C~85°C TA.It is necessary to supply the device with Constant - Programmable current in order to charge it.A list of related parts can be found by searching for the base part number MCP73833.As you can see, it has 10 terminations in it.There is a voltage of 4.2V for the battery pack as well.In addition to Current, a variety of programmable features are available.As far as the charging current is concerned, it is 1.1A at full charge.For the product to work properly, 10 pins must be connected in order to make it work.If the supply voltage exceeds 6V, the device will not function properly.There is a possibility of achieving optimal efficiency when the output voltage of the device is 4.5V.The operation is performed with an output current of 1.2A.This device is a member of subcategory Power Management Circuits.It can function at as low a supply voltage as possible, such as 3.75V.As far as the mounting is concerned, it is mounted in the way of Surface Mount.It was determined during the design process that Vsup (maximum supply voltage) should be set to 3mA.With respect to the power supply for the part, it is set to 3.8/5.5V.
MCP73833T-CNI/UN Features
Battery pack voltage of 4.2V
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73833T-CNI/UN Applications
There are a lot of Microchip Technology MCP73833T-CNI/UN Battery Chargers ICs applications.
- Floor scrubber
- Smart speakers
- Rental fleets
- Electric tour bus
- PDAs
- Locomotive
- Boat
- Truck dealers
- Charging cradle for wearable devices
- Material handling
