MCP73833T-NVI/MF
| Parameters | |
|---|---|
| Pin Count | 10 |
| Output Voltage | 4.5V |
| Power Supplies | 3.8/5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 3mA |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.35V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73833 |
MCP73833T-NVI/MF Overview
It is included in the Tape & Reel (TR) package. A 10-VFDFN Exposed Pad package is included with this item as part of its contents.In this case, the device is mounted in the way of Surface Mount.The correct temperature setting is -40°C~85°C TA.This device makes use of an analog IC called POWER SUPPLY SUPPORT CIRCUIT in order to provide its functionality.To charge the device, there is a requirement for Constant - Programmable current.The base part number MCP73833 can be used to locate related parts for this device.In total, there are 10 terminations.A battery pack is going to have a voltage of 4.35V.10 pins are included in the package.It is possible to program features such as Current.When charging current is maximum, it is rated at 1.1A.In order for the product to function as intended, there are 10 pins that must be connected.This application has a total of 1 channels that can be used.If the supply voltage exceeds 6V, the device will not function properly.It is possible to achieve optimum efficiency in the case of a given output voltage of 4.5V.Operation is done using a 1.2A output current.Devices belonging to subcategory Power Management Circuits include this device.The device can operate at as low a supply voltage as possible, such as 3.75V.It is mounted in the same way as Surface Mount.In most cases, the maximum supply voltage (Vsup) is set to 3mA.The part's power supply is set to a value of 3.8/5.5V.
MCP73833T-NVI/MF Features
Battery pack voltage of 4.35V
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73833T-NVI/MF Applications
There are a lot of Microchip Technology MCP73833T-NVI/MF Battery Chargers ICs applications.
- Portable medical instruments
- PDAs
- Automotive/electrical vehicle
- Conventional charge
- Embedded automotive applications
- Portable speaker systems
- Emergency/Security
- Floor scrubber
- Personnel carriers
- Mobile lighting
