MCP73834-FCI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73834 |
| Pin Count | 10 |
| Output Voltage | 4.5V |
| Power Supplies | 3.8/5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 3mA |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73834-FCI/MF Overview
It comes in the package?of a Tube. It comes as part of the 10-VFDFN Exposed Pad package.In this case, the device is mounted in the way of Surface Mount.A temperature setting of -40°C~85°C TA ensures reliable performance.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Constant - Programmable current is required to charge the device.It is possible to find the related parts of this device by looking at its base part number MCP73834.It contains 10 terminations.There is a setting of 4.2V for the battery pack.This board has 10 pins, making it very simple to construct.Programmable features, such as Current, are available.When charging current is maximum, it is rated at 1.1A.There are 10 pins required in order for the product to function.The total number of channels that can be accessed by users is 1.Batteries with 5.2V should be able to power it.Applied input voltage of 6V does not damage the device.There is a possibility of achieving optimal efficiency when the output voltage of the device is 4.5V.There is a constant output current of 1.2A when it is operating.There is one subcategory of this device, and it is Power Management Circuits.At a low supply voltage, such as 3.75V, it can operate to the best of its ability.As far as the mounting is concerned, it is mounted in the way of Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 3mA.The part's power supply is set to 3.8/5.5V.
MCP73834-FCI/MF Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73834-FCI/MF Applications
There are a lot of Microchip Technology MCP73834-FCI/MF Battery Chargers ICs applications.
- TV sticks
- Automotive electronics
- GPS tracker
- Man lift
- Remote powered communication and telemetry systems
- Painting boat
- Automotive battery charger circuits
- USB power delivery (USB-C) devices
- Electric tour bus
- Wireless headphones
