MCP73834-FCI/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated | 4.533V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.54W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73834 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 4.5V |
| Power Supplies | 3.8/5.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation | 1.54W |
| Output Current | 1A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.5V |
| Max Input Voltage | 6V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 6V |
| Min Output Voltage | 4.168V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Drain to Source Resistance | 300mOhm |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73834-FCI/UN Overview
It is contained in the package Tube.We've included it in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package so that it's easier to use.A Surface Mount mounting type is assigned to the device.Ideally, the temperature should be set to -40°C~85°C TA in order to ensure reliable performance.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.Charge the device by providing it with Constant - Programmable current.This device's related parts can be found under the base part number MCP73834.It contains 10 terminations, so that is how many there are.This battery pack has a voltage of 4.2V.It is equipped with 10 pins.In addition to Current, there are several other programmable options.On the device, it is listed as having a charge current of 1.1A.It requires pins 10 to function.It is possible to access 1 channels.A 5.2V battery should be sufficient.An input voltage of 6V can be applied to the device without damage.High efficiency can be achieved with a 4.5V output voltage.A 1A output current is used for operation.There is one subcategory of this device, and it is Power Management Circuits.A supply voltage of 3.75V is suitable for it, because it can operate with a low supply voltage.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.3mA is set for Vsup (maximum supply voltage).The part's power supply is set to 3.8/5.5V.It can accept a maximum input voltage of 6V volts.It is mandatory to set the voltage at 4.5V for the maximum output supply voltage for this operation.
MCP73834-FCI/UN Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73834-FCI/UN Applications
There are a lot of Microchip Technology MCP73834-FCI/UN Battery Chargers ICs applications.
- Battery backup applications
- Pallet jacks
- Automotive battery charger circuits
- Opportunity charge
- Fleet management
- Home routers
- Automotive/electrical vehicle
- Smart cameras
- Industrial lighting
- Portable devices
