MCP73834T-GPI/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73834 |
| Output Voltage | 4.5V |
| Power Supplies | 3.8/5.5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Output Current | 1.2A |
| Supply Current-Max (Isup) | 3mA |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP73834T-GPI/UN Overview
I found it in the Tape & Reel (TR) package, which comes with everything you need.A 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package is included with this item as part of its contents.Mounting type for the device is Surface Mount.The temperature should be set to -40°C~85°C TA to ensure reliable performance.To charge the device, there is a requirement for Constant - Programmable current.It is possible to find the related parts to the base part number MCP73834.In general, the number of terminations found within it is 10 as a whole.It is set to 4.2V for the battery pack.It is possible to program features such as Current.There is 1.1A maximum charging current listed on the device.You need 10 pins for it to work.A supply voltage of no more than 6V is required for the device to operate properly.When the output voltage is 4.5V, high efficiency is possible.Operation is achieved by providing a 1.2A output current.The device you are looking at belongs to the subcategory of Power Management Circuits.Using a supply voltage as low as 3.75V will allow it to function.It is mounted in the manner of Surface Mount.It is set to 3mA for Vsup (maximum supply voltage).With respect to the power supply for the part, it is set to 3.8/5.5V.The gadget's supply current is set to 2mA.
MCP73834T-GPI/UN Features
Battery pack voltage of 4.2V
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73834T-GPI/UN Applications
There are a lot of Microchip Technology MCP73834T-GPI/UN Battery Chargers ICs applications.
- Portable medical instruments
- Industrial
- Remote sensor
- Portable speaker systems
- USB power delivery (USB-C) devices
- Portable medical equipment
- Medical
- Truck dealers
- Modern LA
- Automotive battery charger circuits
