MCP73837T-FCI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73837 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.5V |
| Max Input Voltage | 7V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 6V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Height | 880μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73837T-FCI/MF Overview
In the Tape & Reel (TR) package, you will find it.In the package 10-VFDFN Exposed Pad, there is a version of it.Amounting type Surface Mount is the one associated with the device.The correct temperature setting is -40°C~85°C TA.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you will need to supply it with Constant - Programmable of current.A list of related parts can be found by searching for the base part number MCP73837.It is possible to find a total of 10 terminations.The device is equipped with a total of 10 pins.A maximum charging current of 1.1A is recommended.It requires pins 10 to function.The system currently provides 1 channels for the user to use.Batteries with 5.2V should be able to power it.It is capable of withstanding a 6V supply voltage.It is possible to achieve high efficiency by using an output voltage of 4.2V.In order to operate, an output current of 1.2A is used.This device is classified as Power Management Circuits under the subcategory.The device can operate at a voltage of 3.75V as low as possible.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.It was determined during the design process that Vsup (maximum supply voltage) should be set to 3mA.It is set to 5V when it comes to the power supply for the part.This device can accept up to 7V volts of input voltage.During this operation, the maximum output supply voltage should be 4.5V.
MCP73837T-FCI/MF Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
MCP73837T-FCI/MF Applications
There are a lot of Microchip Technology MCP73837T-FCI/MF Battery Chargers ICs applications.
- Automotive electronics
- Various chargers
- Industrial handhelds
- Wireless headphones
- Home appliances
- Crosswalk marker lights
- Painting boat
- Cellphones
- Golf carts
- Electricity bank
