MCP73837T-FCI/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Manufacturer Package Identifier | MCP73837T-FCI/UN |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73837 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 3mA |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73837T-FCI/UN Overview
There is a package called Tape & Reel (TR) that contains this item.The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package includes it as a convenience.In this case, the device is mounted in the way of Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There is an analog IC of POWER SUPPLY SUPPORT CIRCUIT used in this device.To charge the device, Constant - Programmable current is required.Identify its related parts based on the base part number MCP73837.As far as the terminations are concerned, there are 10.10 pins are attached to it.According to the specifications, it should be rated at 1.1A when charging at maximum power.It is necessary to connect the 10 pins during the installation process of this product.The number of available channels is 1.If it runs off of a 5.2V battery, then it should be able to run continuously.The device can withstand a supply voltage of 6V.It is possible to achieve optimum efficiency in the case of a given output voltage of 4.2V.There is a constant output current of 1.2A when it is operating.The device you are looking at belongs to the subcategory of Power Management Circuits.A supply voltage of 3.75V is suitable for it, because it can operate with a low supply voltage.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.It was determined during the design process that Vsup (maximum supply voltage) should be set to 3mA.It is set to 5V when it comes to the power supply for the part.
MCP73837T-FCI/UN Features
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73837T-FCI/UN Applications
There are a lot of Microchip Technology MCP73837T-FCI/UN Battery Chargers ICs applications.
- Electric lift car
- Automotive electronics
- Fast charge
- Personnel carriers
- GPS portable devices
- Embedded automotive applications
- USB power delivery (USB-C) devices
- Wearables
- Remote control toys
- Truck dealers
