MCP73838-FCI/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73838 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Max Output Current | 1.2A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.2V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 6V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP73838-FCI/UN Overview
It is available in the package Tube.To make it easier for you, it is included with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.Mounting type Surface Mount is chosen for the device.A temperature setting of -40°C~85°C TA would be the best thing to do.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.Charge the device with Constant - Programmable current.This part number MCP73838 can be used to find its related parts.There are no terminations in it at all.10 pins are included in the package.There is 1.1A maximum charging current listed on the device.During the installation process, this product requires the connection of 10 pins.Channels are available in a total of 1.Using a 5.2V battery should be enough to run it.As long as the supply voltage is 6V, it is capable of withstanding the voltage.The efficiency of the system can be maximized if the output voltage is 4.2V.With a 1.2A output current, the operation is conducted.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.This device can work at as low a voltage as possible, such as 3.75V.In order to mount it, it has to align itself with Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 3mA.It is set to 5V when it comes to the power supply for the part.It is important to note that the maximum output supply voltage for this operation must be set to 4.2V.A reduction in maximum output current to 1.2A occurs during operation.
MCP73838-FCI/UN Features
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73838-FCI/UN Applications
There are a lot of Microchip Technology MCP73838-FCI/UN Battery Chargers ICs applications.
- Electronic dictionary
- Remote sensor
- Portable devices
- Portable speaker systems
- Ruggedized notebooks/tablet computers
- Material handling
- Electric vehicles
- Opportunity charge
- Wireless power
- Smart speakers
