MCP73838-FJI/MF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73838 |
| Pin Count | 10 |
| Output Voltage | 4.5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Nominal Input Voltage | 6V |
| Fault Protection | Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.1A |
| Battery Pack Voltage | 4.2V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP73838-FJI/MF Overview
There is an Tube package that contains it. It is contained in a package named 10-VFDFN Exposed Pad.This device is mounted using type Surface Mount.The temperature should be set to -40°C~85°C TA to ensure reliable performance.The device relies on an analog IC called POWER SUPPLY SUPPORT CIRCUIT to operate.Charge the device by providing it with Constant - Programmable current.The base part number MCP73838 can be used to locate related parts for this device.The overall number of terminations that can be found in it is 10 as a whole.It is 4.2V for the battery pack.This board has 10 pins, making it very simple to construct.As long as it is charged at maximum current, it will be rated as 1.1A.The product is able to function with the help of 10 pins that are required.Currently, there are a total of 1 channels available for use in the application.With a 6V supply voltage, it is capable of withstanding the operation of the device.Ideally, when the output voltage of the device is set to 4.5V, you will be able to achieve the highest degree of efficiency.Operation is done using a 1.2A output current.The device can operate at as low a supply voltage as possible, such as 3.75V.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.
MCP73838-FJI/MF Features
Battery pack voltage of 4.2V
1 channels
10-VFDFN Exposed Pad package
MCP73838-FJI/MF Applications
There are a lot of Microchip Technology MCP73838-FJI/MF Battery Chargers ICs applications.
- Man lift
- Boat
- Rental fleets
- Automotive electronics
- Medical
- Electric tour bus
- Robot
- Opportunity charge
- Forklift
- Automotive battery charger circuits
