MCP73841-410I/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73841 |
| Pin Count | 10 |
| Output Voltage | 4.1V |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 4mA |
| Output Current | 10mA |
| Adjustable Threshold | NO |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73841-410I/UN Overview
If you are looking for it in the Tube package, then you have found it.A 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package is included with this item as part of its contents.Surface Mount is the mounting type of the device.Temperature -40°C~85°C TA is recommended for reliable performance.This device makes use of an analog IC of POWER SUPPLY SUPPORT CIRCUIT.The base part number MCP73841 can be used to locate related parts for this device.Taking it as a whole, it has been concluded that there are 10 terminations to be found.A total of 10 pins are present on it.Programmable features, such as Timer, are available.There are 10 pins necessary to make it work.Channels are available in a total of 1.The device should operate on a 5.1VV battery.To ensure the device works properly, the supply voltage should not exceed 12V.The efficiency of the system can be maximized if the output voltage is 4.1V.It is performed with a current output of 10mA for the output of the operation.The device you are looking at belongs to the subcategory of Power Management Circuits.It can function at as low a supply voltage as possible, such as 4.5V.As far as the mounting is concerned, it is mounted in the way of Surface Mount.The gadget's supply current is set to 4mA.
MCP73841-410I/UN Features
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73841-410I/UN Applications
There are a lot of Microchip Technology MCP73841-410I/UN Battery Chargers ICs applications.
- GPS tracker
- PDAs
- Portable medical instruments
- Electric pallet truck
- Fast charge
- Trash compactors
- Truck dealers
- Electric boat
- Cellphones
- TV sticks
