MCP73841T-420I/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73841 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 4mA |
| Output Current | 10mA |
| Adjustable Threshold | NO |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73841T-420I/UN Overview
It is included in the Tape & Reel (TR) package. With this item, there is a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package that comes with it.There is a type of mounting for this device: Surface Mount.Keeping the temperature at -40°C~85°C TA is the right choice.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.If you use the base part number MCP73841, you can look for related parts.The number of terminations found in it is 10 as a whole.10 pins are attached to it.It is possible to program features such as Timer.It operates on the basis of 10 pins.The number of channels available is 1.It should be possible to run it from a 5.1V battery it should be able to run at all times.With a 12V supply voltage, it is capable of withstanding the operation of the device.In the case of 4.2V output voltage, there is a possibility of optimal efficiency.It is performed with a current output of 10mA for the output of the operation.This device is a member of subcategory Power Management Circuits.A power supply voltage as low as 4.5V can be used for it and it will work as well as possible.Amounting is in line with Surface Mount.A 4mA supply current is set on the gadget.
MCP73841T-420I/UN Features
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73841T-420I/UN Applications
There are a lot of Microchip Technology MCP73841T-420I/UN Battery Chargers ICs applications.
- Electric tour bus
- Rental fleets
- Portable speaker systems
- Model aircraft
- Battery backup applications
- Forklift
- Home routers
- Instruments and meters
- GPS portable devices
- Material handling
