MCP73842-840I/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 9.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73842 |
| Pin Count | 10 |
| Output Voltage | 8.4V |
| Max Output Current | 150mA |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 8.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 750μA |
| Output Current | 10mA |
| Adjustable Threshold | NO |
| Max Output Voltage | 8.442V |
| Max Input Voltage | 13.5V |
| Supply Current-Max (Isup) | 4mA |
| Nominal Input Voltage | 9.4V |
| Min Output Voltage | 8.358V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 ~ 2 |
| Programmable Features | Timer |
| Max Charge Current | 1A |
| Height | 1.1mm |
| Length | 3mm |
| Width | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73842-840I/UN Overview
The Tube package contains it.The package that is included with it comes in the shape of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).There is a mounting type of Surface Mount for this device.If you wish to ensure reliable performance, set the temperature to -40°C~85°C TA.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.Identify its related parts based on the base part number MCP73842.Taking it as a whole, it has been concluded that there are 10 terminations to be found.The device has a total of 10 pins.Serveral programmable features like Timer.There are a total of 10 pins that have to be connected for the product to function correctly.Currently, there are 2 channels available.The device should operate on a 9.2VV battery.There is no damage to the device if an input voltage of 12V is applied.8.4V output voltages can result in high efficiency.The output current is set to 10mA in this case.This device belongs to the subcategory of Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 8.7V.It is mounted in the same way as Surface Mount.There is 4mA voltage set in Vsup (maximum supply voltage).The supply of the gadget is running with 750μA current.This device can accept up to 13.5V volts of input voltage.It is important to note that the maximum output supply voltage for this operation must be set to 8.442V.It is important to note that during operation, the maximum output current is reduced to 150mA.
MCP73842-840I/UN Features
2 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73842-840I/UN Applications
There are a lot of Microchip Technology MCP73842-840I/UN Battery Chargers ICs applications.
- Personnel carriers
- Trash compactors
- Rental fleets
- Man lift
- Portable speaker systems
- Medical
- GPS portable devices
- Pallet jacks
- TV sticks
- Opportunity charge
