MCP73842T-820I/UN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 9.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73842 |
| Pin Count | 10 |
| Output Voltage | 8.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 8.7V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 4mA |
| Output Current | 10mA |
| Adjustable Threshold | NO |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 ~ 2 |
| Programmable Features | Timer |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP73842T-820I/UN Overview
In the Tape & Reel (TR) package, you will find it.The product comes in the package of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).Device mounting type Surface Mount is specified.If the temperature is set to -40°C~85°C TA, reliable performance will be assured.The device relies on an analog IC called POWER SUPPLY SUPPORT CIRCUIT to operate.If you use the base part number MCP73842, you can look for related parts.As a whole, it contains 10 terminations.There are 10 pins on it.Among the programmable features are Timer.For the product to work correctly, 10 pins are required, and a connection to each pin is required.Currently, there are 1 channels available.It should be able to run off a battery of 9.2V.If the supply voltage exceeds 12V, the device will not function properly.It is possible to achieve high efficiency by using an output voltage of 8.2V.A device of this type will have its output current set to 10mA in this case.This device belongs to the subcategory of Power Management Circuits.This circuit can function at a low supply voltage, such as 8.7VV.Aligning it with Surface Mount is required for mounting.It appears that there is 4mA current flowing through the supply of the gadget at the moment.
MCP73842T-820I/UN Features
1 channels
Power Management Circuits subcategory
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
MCP73842T-820I/UN Applications
There are a lot of Microchip Technology MCP73842T-820I/UN Battery Chargers ICs applications.
- Automotive electronics
- Charging cradle for wearable devices
- GPS tracker
- Painting boat
- Remote powered communication and telemetry systems
- Conventional charge
- Marine buoy lights
- Electricity bank
- Opportunity charge
- Fast charge
