MCP73863-I/SL
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated | 4.221V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP73863 |
| Pin Count | 16 |
| Output Voltage | 4.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | NO |
| Max Output Voltage | 4.221V |
| Max Input Voltage | 13.5V |
| Supply Current-Max (Isup) | 4mA |
| Nominal Input Voltage | 12V |
| Min Output Voltage | 4.079V |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.38A |
| Height | 1.4986mm |
| Length | 9.8806mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
MCP73863-I/SL Overview
In the Tube package, you will find it.It can be found in package 16-SOIC (0.154, 3.90mm Width).This device has a mounting type of Surface Mount.If you wish to ensure reliable performance, set the temperature to -40°C~85°C TA.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Providing Constant - Programmable current to the device is the only way to charge it.A list of related parts can be found by searching for the base part number MCP73863.As you can see, it has 16 terminations in it.In total, it has 16 pins.Timer are a programmable feature.On the device, it is listed as having a charge current of 1.38A.The operation?are 16 pins.Channels are available in an amount of 1.The board is capable of handling a voltage input of zero volts.The 4.2V output voltage allows for high efficiency.In order to operate, an output current of 1.2A is used.There is a subcategory of Power Management Circuits for this device.Using a supply voltage as low as 4.5V will allow it to function.As far as the mounting is concerned, it is mounted in the way of Surface Mount.It was determined during the design process that Vsup (maximum supply voltage) should be set to 4mA.It can take a maximum input voltage of 13.5V volts.Voltage 4.221V is the maximum output voltage needed for this operation.
MCP73863-I/SL Features
1 channels
Power Management Circuits subcategory
16-SOIC (0.154, 3.90mm Width) package
MCP73863-I/SL Applications
There are a lot of Microchip Technology MCP73863-I/SL Battery Chargers ICs applications.
- Electric tour bus
- Drone
- Conventional charge
- Electricity bank
- Laptops
- Fast charge
- Floor scrubber
- Charging cradle for wearable devices
- Fleet management
- Cellphones
