MCP8024-H/MP
| Parameters | |
|---|---|
| Height | 850μm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Number of Pins | 40 |
| Weight | 117.310327mg |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 6V~28V |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 461kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP8024 |
| Function | Controller - Commutation, Direction Management |
| Number of Outputs | 3 |
| Output Voltage | 12V |
| Interface | PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Pre-Driver - Half Bridge (3) |
| Output Current | 500mA |
| Reference Voltage | 1.25V |
| Collector Emitter Voltage (VCEO) | 28V |
| Max Collector Current | 500mA |
| Switching Frequency | 461kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
MCP8024-H/MP Overview
The design contains a Tubepackage.Drivers controllers comes in a 40-VFQFN Exposed Pad case.Ideally, the part should be mounted by Surface Mount.This component is suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 6V~28V volts.A range of -40°C~150°C TAis available for operating temperature.Motors can be classified as Brushless DC (BLDC).Surface Mountis its recommended mounting method.The device employs the BRUSHLESS DC MOTOR CONTROLLER analog IC.The MCP8024part number is used to locate the part.Drivers controllers is designed wDrivers controllersh 40 pins.There are 3 outputs available.In this case, 12Vis maintained as the output voltage.Drivers controllers is possible to recognize Brushless DC (BLDC)as the type of motor.With a 500mA output current, it offers the greatest degree of design flexibility.In this case, 461kHzis the maximum frequency that can be achieved.
MCP8024-H/MP Features
Applications : General Purpose
base on MCP8024 number
designed with 3 outputs
Motor Type classified as Brushless DC (BLDC)
MCP8024-H/MP Applications
There are a lot of Microchip Technology MCP8024-H/MP motor drivers applications.
- Hospitality buildings
- Lighting for health and wellbeing
- Home lighting systems
- Dome
- Handheld devices
- Automotive instrumentation
- Architectural lighting
- Multiple output capability
- Alternative to HID lights
- Brake lights
