MCP8026-115E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP Exposed Pad |
| Number of Pins | 48 |
| Weight | 117.310327mg |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tray |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Technology | NMOS, PMOS |
| Voltage - Supply | 6V~28V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP8026 |
| Function | Controller - Commutation, Direction Management |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Operating Supply Voltage | 28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Operating Supply Current | 5μA |
| Output Configuration | Pre-Driver - Half Bridge (3) |
| Output Current | 500mA |
| Collector Emitter Voltage (VCEO) | 19V |
| Max Collector Current | 500mA |
| Switching Frequency | 461kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.05mm |
| Length | 7mm |
| Width | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP8026-115E/PT Overview
The design includes a package of type [0].The part is packged with 48-TQFP Exposed Pad case.Mounting the part by Surface Mountis recommended.I believe it would be suitable for the component connected to General Purpose.A device with a voltage range of 6V~28V volts is available.There is a temperature range of -40°C~150°C TAin which this device operates.There is a motor type Brushless DC (BLDC)associated with this motor type.In this part, there are 48 terminations available.Please take in mind that this amplifier should be run at 13V.There is a recommended mounting method of Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.Using the MCP8026part number, it is located.48 pins are provided for its design.A total of 1outputs are available.The driver operates on a supply voltage of 28V volts.Drivers controllers is maintained at 12V volts.Drivers controllers is possible to recognize the motor type as [0].With a 500mA output current, it offers maximal design flexibility.For its operation, a supply current of 5μAis used.
MCP8026-115E/PT Features
Applications : General Purpose
base on MCP8026 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
MCP8026-115E/PT Applications
There are a lot of Microchip Technology MCP8026-115E/PT motor drivers applications.
- Charge pump circuits
- Emergency lighting
- High brightness LED lighting
- High brightness LED lighting
- PDAs
- Lighting for health and wellbeing
- Scanning equipment
- Hidden coves in high-end residential settings
- Multiple output capability
- Human-centric lighting
