MCP809T-300I/TT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.85V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Quiescent Current | 45μA |
| Accuracy | -5 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height | 1.016mm |
| Length | 3.0226mm |
| Width | 1.397mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP809T-300I/TT Overview
A total of 3 terminals are used to mount this power management. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. When 2.85V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 3 pins are located on this power management. The pins of the power management system count 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 60μA. A similar IC managements number of the manufacturer can always be found by using MCP809, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 60μA.
MCP809T-300I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP809T-300I/TT Applications
There are a lot of Microchip Technology MCP809T-300I/TT Voltage Supervisors applications.
- Power distribution systems of CCU
- Household appliances
- Magnetic resonance imaging
- Satellite navigation
- emergency room
- Efficient information transmission
- Linux and server computing
- Battery-powered equipment
- Military electronics
- Transformer load monitoring equipment
