MCZ33880EGR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 28 |
| Weight | 756.251879mg |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| Resistance | 550mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Max Output Current | 800mA |
| Operating Supply Voltage | 24.5V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | SPI, Serial |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Power Dissipation-Max | 1.3W |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Current - Output | 800mA |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 24.5V |
| Halogen Free | Halogen Free |
| Fault Protection | Over Voltage |
| Height Seated (Max) | 2.65mm |
| Length | 17.925mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MCZ33880EGR2 Overview
Package SOIC includes it.This device has a total of 28 terminations.DUAL is the terminal position of the device.The device has a total of 28 pins.The supply voltage 5V is necessary for high efficiency.Hot-swappable device is necessary to use 28 pins in order to operate the device.There is a Surface Mount axis pointing in the direction of the object.Operating at 125°C°C allows for stable operation.Hot-swappable device works at a minimum temperature of -40°C degrees Celsius to maintain reliabilHot-swappable devicey.For normal operation, Vsup should be maintained above 4.75V.The maximum supply voltage is set to 5.25V.Hot Swap uses an analog IC, in this case a BRUSH DC MOTOR CONTROLLER.As a default, it's set to output 8.In order to meet the operation criteria, the maximum output current must be reduced to 800mA.8mA is the maximum current required for its operation.Devices have 550mOhm resistance.
MCZ33880EGR2 Features
The terminal position of 28
MCZ33880EGR2 Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MCZ33880EGR2 hot swap controllers applications.
- Microcontrollers
- Automotive circuits
- Network router
- Hard drive
- Redundant Array of Disks (RAID)
- Overvoltage protection
- Limitting the inrush current
- Load transient protection
- Automatic restart after load failure
- Current limit and current foldback limit functions
