MCZ33880EWR2
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 510.007921mg |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 550mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 32 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 800mA |
| Operating Supply Voltage | 24.5V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | SPI |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Power Dissipation-Max | 1.7W |
| Max Supply Current | 8mA |
| Current - Output | 800mA |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 24.5V |
| Halogen Free | Halogen Free |
| Fault Protection | Over Voltage |
| Height Seated (Max) | 2.65mm |
| Length | 11mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MCZ33880EWR2 Overview
The SOIC package contains it.In total, it has 32 terminations.In this case, the device is located at terminal DUAL.In total, it has 32 pins.High efficiency can be achieved when the supply voltage is 5V.This device operates by using 32 pins.Stable operation can be achieved with a maximum operating temperature of 150°C°C.To maintain reliability, it functions at a minimum working temperature of -40°C degrees Celsius.Hot-swappable device is important that the supply voltage (Vsup) is kept above 4.75V for normal operation of the device.Hot-swappable device is set to 5.25V (maximum supply voltage).As the name suggests, this gadget uses an analog IC, which in this case is BRUSH DC MOTOR CONTROLLER.By default, it produces output 8.When operating criteria are met, the maximum output current is reduced to 800mA.Hot Swap requires 8mA volts of current to operate.Despite its 550mOhm resistance, the device is not easily damaged.
MCZ33880EWR2 Features
The terminal position of 32
MCZ33880EWR2 Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MCZ33880EWR2 hot swap controllers applications.
- Solid state circuit breakers
- PC board hot swap insertion and removal
- Disconnect faulty loads before supply voltage drops
- Active current limit
- Loads
- Comprehensive analog and digital capabilities
- Undervoltage protection
- Servers
- Overvoltage protection
- Distributed power systems
