MCZ33996EK
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCZ33996 |
| JESD-30 Code | R-PDSO-G32 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 27V |
| Power Supplies | 5/27V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | SPI |
| Current - Output (Max) | 900mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3.1V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:16 |
| Voltage - Load | 5V~27V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 550m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 11mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-SSOP (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
MCZ33996EK Overview
It is packaged in the form of a Tube.The 32-SSOP (0.295, 7.50mm Width) Exposed Pad package includes it.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.Operation is based on a supply voltage of 3.1V~5.5V.A maximum output voltage of N-Channel volts has been specified.There is a MCZ33996 family of things that it belongs to.The termination count is 32.Currently, the lighting driver has a total of 1 functions.The maximum output of the LED driving board is 900mAV.Supply voltages of 13V allow for high efficiency.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The lighting driver is configured to have a maximum supply voltage of 27V (Vsup).Normal operation requires a voltage above 5V for the supply voltage.A 5/27V power supply is used by the part.
MCZ33996EK Features
Supplied from 13V
MCZ33996EK Applications
There are a lot of NXP USA Inc. MCZ33996EK Power Switches ICs applications.
- USB Protection
- Notebook PC
- Storage Drives
- HDD, SSD
- Low Voltage I/O System Power
- Wearable Devices
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- Portable Music Players
- Hot Swap
