MCZ33996EKR2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 32-SSOP (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCZ33996 |
| JESD-30 Code | R-PDSO-G32 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 27V |
| Power Supplies | 5/27V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | SPI |
| Current - Output (Max) | 900mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3.1V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:16 |
| Voltage - Load | 5V~27V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 550m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 11mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MCZ33996EKR2 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 32-SSOP (0.295, 7.50mm Width) Exposed Pad.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver is equipped with 16 outputs that can be used.A voltage of 3.1V~5.5V is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.It is a member of the MCZ33996 family.It has a total of 32 terminations.The LED driving board has a total of 1 functions.In terms of output, the lighting driver can provide a maximum of 900mA V.High efficiency is possible when the supply voltage is set to 13V.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The LED driver is configured with a maximum supply voltage of 27V (Vsup).Normal operation requires Vsup above 5V.This part's power supply is 5/27V.
MCZ33996EKR2 Features
Supplied from 13V
MCZ33996EKR2 Applications
There are a lot of NXP USA Inc. MCZ33996EKR2 Power Switches ICs applications.
- Notebook PC
- Notebook and Tablet Computers
- Set-Top Boxes
- Telecom and Network Systems
- HDD and SSD
- Storage (HDDs, SSDs)
- Portable Video Game Players
- Wireless Modem Data Cards
- Hot Swap
- Portable Music Players
