MCZ33999EK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 54-SSOP (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | PWM Input |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 54 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCZ33999 |
| JESD-30 Code | R-PDSO-G54 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 27V |
| Power Supplies | 5/27V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | SPI |
| Current - Output (Max) | 900mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3.1V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:16 |
| Voltage - Load | 5V~27V |
| Driver Number of Bits | 16 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 10 µs |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 550m Ω |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.45mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
MCZ33999EK Overview
The LED driver's packaged as a Tube.There is a 54-SSOP (0.295, 7.50mm Width) Exposed Pad package that includes it.This lighting drivere has a mounting type of Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 16 outputs.A supply voltage of 3.1V~5.5V is required for it to operate.The maximum output voltage is N-Channel volts.A lighting driver with PWM Input features is available.The MCZ33999 family contains this object.A total of 54 terminations have been found in it.It is important to note that the LED driving board has 1 functions.900mAV is the maximum output of the LED driver.With a supply voltage of 13V, high efficiency is possible.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage for this LED driver is 27V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5V.A 5/27V power supply is used by the part.
MCZ33999EK Features
Supplied from 13V
MCZ33999EK Applications
There are a lot of NXP USA Inc. MCZ33999EK Power Switches ICs applications.
- Wireless/Networking Cards
- PDAs
- USB3.1 Power Delivery
- Portable GPS
- Hot Swap
- Portable GPS Device
- Portable Video Game Players
- Smart Phones, Feature Phones
- Hot Swaps
- PC Card Hot Swap
