banner_page

MCZ33999EKR2

5/27V N-Channel 0.65mm PMIC MCZ33999 13V 54-SSOP (0.295, 7.50mm Width) Exposed Pad


  • Manufacturer: NXP USA Inc.
  • Nocochips NO: 568-MCZ33999EKR2
  • Package: 54-SSOP (0.295, 7.50mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 368
  • Description: 5/27V N-Channel 0.65mm PMIC MCZ33999 13V 54-SSOP (0.295, 7.50mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 54-SSOP (0.295, 7.50mm Width) Exposed Pad
Surface Mount YES
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2003
JESD-609 Code e3
Feature PWM Input
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 54
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
HTS Code 8542.39.00.01
Subcategory Peripheral Drivers
Technology BCDMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 13V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCZ33999
JESD-30 Code R-PDSO-G54
Number of Outputs 16
Qualification Status Not Qualified
Output Type N-Channel
Supply Voltage-Max (Vsup) 27V
Power Supplies 5/27V
Supply Voltage-Min (Vsup) 5V
Interface SPI
Current - Output (Max) 900mA
Output Configuration Low Side
Voltage - Supply (Vcc/Vdd) 3.1V~5.5V
Switch Type General Purpose
Ratio - Input:Output 1:16
Voltage - Load 5V~27V
Driver Number of Bits 16
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Turn On Time 10 µs
Output Peak Current Limit-Nom 1.2A
Rds On (Typ) 550m Ω
Turn Off Time 10 µs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Height Seated (Max) 2.45mm
Length 17.9mm
Width 7.5mm
RoHS Status ROHS3 Compliant

MCZ33999EKR2 Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).It is included with the 54-SSOP (0.295, 7.50mm Width) Exposed Pad package as well.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There are 16 outputs available on this lighting driver.The LED driving board operates at 3.1V~5.5V volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has PWM Input features.It belongs to the family MCZ33999.It consists of 54 terminations in total.It has 1 functions.Its maximum output voltage is 900mAV.High efficiency is possible when the supply voltage is set to 13V.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This LED driver is configured to have a maximum supply voltage of 27V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 5V.In this part, the power supply is set to 5/27V.

MCZ33999EKR2 Features


Supplied from 13V

MCZ33999EKR2 Applications


There are a lot of NXP USA Inc. MCZ33999EKR2 Power Switches ICs applications.

  • Storage Drives
  • PC Card Hot Swap
  • Hard Disk Drives
  • USB Power Distribution
  • Wearable Devices
  • Portable Music Players
  • Wireless Modem Data Cards
  • Portable GPS
  • Solid State Drivers
  • Telecom and Network Systems

Write a review

Note: HTML is not translated!
    Bad           Good