MD1210K6-G
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VQFN Exposed Pad |
| Number of Pins | 12 |
| Weight | 21.99923mg |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~13V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MD1210 |
| Max Output Current | 2A |
| Operating Supply Voltage | 12V |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 550μA |
| Output Current | 2A |
| Propagation Delay | 7 ns |
| Input Type | Non-Inverting |
| Rise Time | 6ns |
| Fall Time (Typ) | 6 ns |
| Rise / Fall Time (Typ) | 6ns 6ns |
| Interface IC Type | AND GATE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.3V 1.2V |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
MD1210K6-G Overview
For greater flexibility, its 12-VQFN Exposed Pad package is used.A package of Tape & Reel (TR) has been used.This device is equipped with 2 drivers for its configuration.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 4.5V~13V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -20°C~125°C TJ.Non-Inverting is used as the input type in this program.12 terminations constitute its foundation.There are various related parts under its base part number MD1210.Surface Mount is the way it takes to mount the device.When designing, the device is configured with 12 pins.Specification is for 12V supply voltage operation.Mosfet driver utilizes the interface IC AND GATE BASED MOSFET DRIVER.An output current as high as 2A can be achieved at maximum power.There are several useful electronic components found in its subcategory of MOSFET Drivers.An output current of 2A is supported.A voltage of 12V should be set for the operating supply voltage.Powered by 550μA volts, it operates on a constant current.
MD1210K6-G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
12 pins
MD1210K6-G Applications
There are a lot of Microchip Technology MD1210K6-G gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Drives
- Portable Media Players
- Line drivers
- Head-up and Head mounted displays
- Pulse transformer drivers
- Industrial Modules
- AC-DC Inverters
- LCD/LCoS/DLP portable and embedded pico projectors
- Broadcast equipment
