MD1211LG-G
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MD1211 |
| Max Output Current | 2A |
| Operating Supply Voltage | 12V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Memory Type | Volatile |
| Output Current | 2A |
| Input Type | Non-Inverting |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 12V |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 1.5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10kOhm |
| Number of Positions | 16 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Supply | 4.5V~13V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
MD1211LG-G Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Tape & Reel (TR) represents the packaging method.Gate drivers is configured wGate driversh 2 drivers.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is 4.5V~13V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.This device allows temperatures in the range of -20°C~125°C TJ.Non-Inverting is used as the input type in this program.It's configured with 8 terminations.The base part number MD1211 refers to a number of related parts.The mount method is Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible for the output current to be as low as 2A.The output current supported by the device is 2A.Setting the operating supply voltage to 12V is recommended.Powered by 10μA volts, it operates on a constant current.This device requires a resistance value of 10kOhm.
MD1211LG-G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Resistance of 10kOhm
MD1211LG-G Applications
There are a lot of Microchip Technology MD1211LG-G gate drivers applications.
- Industrial Modules
- Isolated Supplies for Motor Control
- High frequency line drivers
- Pulse transformer drivers
- Uninterruptible Power Supplies (UPS)
- Portable computers
- Telecom switch mode power supplies
- Multicolor LED/laser displays
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Supplies for controller area network (CAN),
