MD1213K6-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VQFN Exposed Pad |
| Number of Pins | 12 |
| Weight | 21.99923mg |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Supply | 4.5V~13V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MD1213 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Operating Supply Voltage | 12V |
| Operating Supply Current | 550μA |
| Nominal Supply Current | 550μA |
| Output Current | 2A |
| Propagation Delay | 7 ns |
| Input Type | Non-Inverting |
| Rise Time | 6ns |
| Fall Time (Typ) | 6 ns |
| Rise / Fall Time (Typ) | 6ns 6ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 10 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.3V 1.2V |
| Turn Off Time | 10 μs |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MD1213K6-G Overview
A higher level of flexibility is provided by its 12-VQFN Exposed Pad package.Gate drivers is packaged in the way of Tape & Reel (TR).Configuration is supported by 2 drivers.Surface Mount is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~13V supply voltage.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -20°C~125°C TJ.This program uses the input type of Non-Inverting.As a result of its configuration, it contains a maximum of 12 terminations.There are various related parts under its base part number MD1213.Mosfet driver is mounted using Surface Mount.During design, it is configured with 12 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.Mosfet driver is possible for the output current to be as low as 2A.The output current supported by the device is 2A.Mosfet gate drivers is recommended that the operating supply voltage be set to 12V volts.With a voltage of 550μA, it operates with a constant current.The frequency of 100kHz can be used to improve efficiency.
MD1213K6-G Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
12 pins
MD1213K6-G Applications
There are a lot of Microchip Technology MD1213K6-G gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Industrial motor drives - compact, standard, premium, servo drives
- Power factor correction (PFC) circuits
- Motor Controls
- Isolated Supplies for Motor Control
- UPS systems
- Automotive Applications
- Portable Media Players
- RGB applications
- White Goods - Air Conditioner, Washing Machine,
