MD1813K6-G
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MD1813 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 7mA |
| Power Dissipation | 2.2W |
| Propagation Delay | 7 ns |
| Input Type | Non-Inverting |
| Rise Time | 6ns |
| Fall Time (Typ) | 6 ns |
| Rise / Fall Time (Typ) | 6ns 6ns |
| Interface IC Type | AND GATE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.3V 1.7V |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 57.09594mg |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 2.2W |
| Voltage - Supply | 4.5V~13V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
MD1813K6-G Overview
There is greater flexibility with the 16-VQFN Exposed Pad package.The packaging method is indicated by Tape & Reel (TR).Gate drivers is configured wGate driversh 4 drivers.Surface Mount is the way in which it is mounted.When the supply voltage is set to 4.5V~13V, it can demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.This device allows temperatures in the range of -20°C~125°C TJ.Non-Inverting is used as the input type.There are 16 terminations to form the base of its configuration.Mosfet driver is possible to find various related parts under Mosfet drivers base part number MD1813.The mount method is Surface Mount.A total of 16 pins are available on the device.Specification is for 12V supply voltage operation.Mosfet driver employs an interface chip called AND GATE BASED MOSFET DRIVER as Mosfet drivers interface chip.2A is the maximum output current.Based on its maximum power dissipation of 2.2W, it is clear that it is capable of transferring and conducting power loss without overheating.The supply voltage of this device is 7mA and it operates with that voltage.By using 100kHz frequency, efficiency can be increased.
MD1813K6-G Features
Embedded in the Tape & Reel (TR) package
4 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
Maximum power dissipation of 2.2W
MD1813K6-G Applications
There are a lot of Microchip Technology MD1813K6-G gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Commercial and agricultural vehicles (CAV)
- Isolated Supplies for controller area network (CAN),
- DC-DC Converters
- Portable Media Players
- High frequency line drivers
- DC/DC converters
- Line drivers
- UPS systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
