MD80C88-2/883
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 40 |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Number of Terminations | 40 |
| ECCN Code | 3A001.A.2.C |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.75V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 80.5mA |
| Bit Size | 8 |
| Frequency (Max) | 8MHz |
| Data Bus Width | 816b |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Screening Level | 38535Q/M;38534H;883B |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Height Seated (Max) | 5.715mm |
| Length | 52.464mm |
| RoHS Status | RoHS Compliant |
MD80C88-2/883 Overview
Shipping overseas is convenient since the embedded microprocessor is packed in CDIP. I would rate this as a MICROPROCESSOR for the uPs/uCs/Peripheral ICs type. In total, 40 terminations have been made. Using a 5V voltage supply, you should be able to operate the cpu microprocessor. It is an architecture with 8 bits. 40 pin functions are described in the datasheets. With a maximum supply current of 5.25V, it has a maximum power consumption. This microprocessor is a typical Microprocessors. Data can be transferred over 816b bandwidths. The microprocessor should not operate in an environment where the temperature is higher than 125°C. An injection of 40 pins is performed inside the body of the micro processor. Many applications use this CPU with Through Hole mounted. CPU frequency should reach 8MHz. It is specified in the datasheet that this micro processor requires 5V power supplies. The CPU can only be powered by voltages up to 80.5mA.
MD80C88-2/883 Features
8-Bit Structure
816b-Bit Data Bus Width
MD80C88-2/883 Applications
There are a lot of Intersil (Renesas Electronics America) MD80C88-2/883 Microprocessor applications.
- Electrocardiogram (EKG)
- Toys
- Set-top boxes
- Torpedo guidance
- Xbox
- Light sensing & controlling devices
- Heater/Fan
- Agriculture, transportation field
- Network communication, mobile communication field
- Office automation equipment and computer peripherals
