MDC3105DMT1G
| Parameters | |
|---|---|
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 380mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Current Rating | 400mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MDC3105 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 800μA |
| Output Configuration | Low Side |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Output Current per Channel | 400mA |
| Rise Time | 160ns |
| Fall Time (Typ) | 45 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V Max |
| Number of Drivers | 1 |
| Built-in Protections | TRANSIENT |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74, SOT-457 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MDC3105DMT1G Overview
It is packaged in the form of a Tape & Reel (TR).There is a package for it in the SC-74, SOT-457 package.The lighting driver is mounted in the Surface Mount position.This switch is of type Relay, Solenoid Driver.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 2.A voltage of Not Required is used to power it.A maximum voltage of Bipolar volts is available from the output of this LED driver.As you can see, it comes from the MDC3105 family.A total of 6 terminations can be found in it.In order to operate, the 6 pins are used.As far as the lighting driver is concerned, there are 1 functions.The maximum output current must drop to 500mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 6 pins.As a result, the output current is set to 400mA.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A 5V power supply is used by the part.A total of 1 drivers are included in the part.
MDC3105DMT1G Features
Supplied from 5V
MDC3105DMT1G Applications
There are a lot of ON Semiconductor MDC3105DMT1G Power Switches ICs applications.
- Solid-State Drives
- USB Ports/Hubs
- Smart Phones, Feature Phones
- USB Protection
- PDAs
- Solid State Drivers
- Various applications equipped with buttons
- Hot Swaps
- Hot-Swap Systems
- HDD and SSD
