MDM-100PH001F
| Parameters | |
|---|---|
| Contact Material | NOT SPECIFIED |
| Insulation Material | GLASS FILLED DIALLYL PHTHALATE |
| Shell Material | ALUMINUM ALLOY |
| Mounting Option 1 | HOLE .087-.098 |
| Mounting Option 2 | FLOAT BUSHING |
| Published | 2006 |
| Series | MDM |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Crimp |
| ECCN Code | EAR99 |
| Type | D-Type, Micro-D |
| Number of Positions | 100 |
| Number of Rows | 4 |
| Gender | Male |
| HTS Code | 8536.69.40.30 |
| Subcategory | D Type Connectors |
| Total Number of Contacts | 100 |
| Shielding | Unshielded |
| Shell Finish | CADMIUM/YELLOW CHROMATE |
| Reference Standard | UL |
| Contact Finish | Gold |
| Reliability | COMMERCIAL |
| Operating Temperature (Max) | 125°C |
| Body Breadth | 0.394 inch |
| Operating Temperature (Min) | -55°C |
| Body Depth | 0.191 inch |
| Rated Current (Signal) | 3A |
| Contact Style | Pin |
| Contact Resistance | 10mOhm |
| Insulation Resistance | 5000000000Ohm |
| Mating Contact Pitch | 0.05 inch |
| Max Current Rating | 3A |
| Dielectric Withstanding Voltage | 900VAC V |
| Cable Length | 457mm |
| Wire/Cable Gauge | 26 AWG |
| Contact Pattern | STAGGERED |
| Insertion Force-Max | 2.224 N |
| Withdrawl Force-Min | .139 N |
| Mating Contact Row Spacing | 0.043 inch |
| 1st Connector | Plug, Male Pins |
| 2nd Connector | Individual Wire Leads |
| Connector Type A | D-Sub |
| Contact Design | PREASSEM CONN |
| Wire Size (Min) | 32 AWG |
| Wire Size (Max) | 24 AWG |
| Length | 1.50' 457.20mm |
| RoHS Status | Non-RoHS Compliant |
See Relate Datesheet
