MDM-25PL1P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Material | PHOSPHOR BRONZE |
| Mount | Panel |
| Shell Material | ALUMINUM ALLOY |
| Housing Material | Polymer |
| Packaging | Bulk |
| Series | 83513-Style Micro D Metal Shell (MDM) |
| JESD-609 Code | e4 |
| Feature | Shielded |
| Part Status | Active |
| Termination | Crimp |
| ECCN Code | EAR99 |
| Connector Type | D-Sub, Plug, Signal |
| Type | D-Type, Micro-D |
| Number of Positions | 25 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Number of Rows | 2 |
| Gender | Male |
| HTS Code | 8536.69.40.30 |
| Subcategory | D Type Connectors |
| Total Number of Contacts | 25 |
| Current Rating | 3A |
| Shell Finish | CADMIUM/YELLOW CHROMATE |
| Reference Standard | UL |
| Contact Finish | Gold |
| Reliability | COMMERCIAL |
| Body Breadth | 0.308 inch |
| Rated Current (Signal) | 3A |
| Contact Style | Pin |
| Contact Resistance | 10mOhm |
| Insulation Resistance | 5000000000Ohm |
| Mating Contact Pitch | 0.05 inch |
| Max Current Rating | 3A |
| Dielectric Withstanding Voltage | 900VAC V |
| Cable Length | 12mm |
| Wire/Cable Gauge | 25 AWG |
| Contact Pattern | STAGGERED |
| Withdrawl Force-Min | .139 N |
| Mating Contact Row Spacing | 0.043 inch |
| 1st Connector | Plug, Male Pins |
| 2nd Connector | Individual Wire Leads |
| Connector Type A | D-Sub |
| Contact Design | PREASSEM CONN |
| Length | 0.042' 12.70mm 0.50 |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
See Relate Datesheet
