MIC1832NY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Additional Feature | MANUAL RESET INPUT |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MIC1832 |
| Output | Open Drain or Open Collector |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Nominal Supply Current | 30μA |
| Power Dissipation | 700mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.55V 2.88V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 2.8V |
| Max Reset Threshold Voltage | 2.97V |
| Height Seated (Max) | 4.699mm |
| Length | 9.779mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MIC1832NY Overview
There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tube. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at NOT APPLICABLE. Manage ics operate at 5V supply voltages. When 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. 8 pins make up the power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use MIC1832, the base supervisor number, when searching for similar PMICs from the manufacturer.
MIC1832NY Features
Simple Reset/Power-On Reset type
MIC1832NY Applications
There are a lot of Microchip Technology MIC1832NY Voltage Supervisors applications.
- Refrigeration
- Power distribution systems of ICU
- Automotive power systems
- Computer applications
- Power distribution systems of operating room
- Rechargeable batteries
- Display equipment
- Important electronics for automotive protection
- Battery-powered equipment
- Medical-specific isolation transformer
