banner_page

MIC2003-0.5YML-TR

P-Channel PMIC MIC2003 6 Pin 6-VDFN Exposed Pad, 6-MLF?


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2003-0.5YML-TR
  • Package: 6-VDFN Exposed Pad, 6-MLF®
  • Datasheet: PDF
  • Stock: 972
  • Description: P-Channel PMIC MIC2003 6 Pin 6-VDFN Exposed Pad, 6-MLF? (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-VDFN Exposed Pad, 6-MLF®
Number of Pins 6
Supplier Device Package 6-MLF® (2x2)
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 100MOhm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Current Rating 500mA
Base Part Number MIC2003
Number of Outputs 1
Output Type P-Channel
Max Output Current 500mA
Interface On/Off
Current - Output (Max) 500mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 2.5V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 70mOhm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2003-0.5YML-TR Overview


It is package in Tape & Reel (TR) case.The 6-VDFN Exposed Pad, 6-MLF? package includes it.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.It belongs to the family MIC2003.In order to operate, 6 pins are used.In this case, the LED driving board can produce only 500mAV as its maximum output.To comply with the operation criteria, the maximum output current is reduced to 500mA.This lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 100MOhm ohms.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.

MIC2003-0.5YML-TR Features


Resistance of 100MOhm

MIC2003-0.5YML-TR Applications


There are a lot of Microchip Technology MIC2003-0.5YML-TR Power Switches ICs applications.

  • PC Card Hot Swap
  • USB Ports/Hubs
  • Mobile Communication Devices
  • USB3.1 Power Delivery
  • Storage (HDDs, SSDs)
  • Hot Swap
  • Wireless Modem Data Cards
  • Gaming
  • PDAs
  • Portable/Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good