MIC2004-0.8YM5-TR
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Load Discharge |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100MOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 800mA |
| Base Part Number | MIC2004 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 800mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Current - Output (Max) | 800mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70mOhm |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
MIC2004-0.8YM5-TR Overview
A Tape & Reel (TR) is used to package it.There is a package for it in the SC-74A, SOT-753 package.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There is a default setting of 1 for output.Operation is based on a supply voltage of Not Required.The maximum output voltage is P-Channel volts.The lighting driver has Load Discharge features.It is part of the MIC2004 family of LED drivers.The operation is carried out using the 5 pins.The maximum output of the LED driving board is 800mAV.In order to meet the operation criteria, the maximum output current drops to 800mA.This lighting driver is mounted in the way of Surface Mount.There is 100MOhm resistance on the LED driver.As far as input voltage goes, its maximum is 5.5V volts.The minimum input voltage is 2.5V volts.It is designed to be stable at 85°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.There is a maximum supply voltage of 5.5VV that it is capable of handling.
MIC2004-0.8YM5-TR Features
Resistance of 100MOhm
MIC2004-0.8YM5-TR Applications
There are a lot of Microchip Technology MIC2004-0.8YM5-TR Power Switches ICs applications.
- Solid State Drivers
- USB Ports/Hubs
- Hot Swap
- Notebook PC
- Wireless Modem Data Cards
- Hard Disk Drives
- USB Power Distribution
- Mobile Communication Devices
- Solid-State Drives
- Hot Swaps
