MIC2004-1.2YM5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Load Discharge |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 70mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.2A |
| Base Part Number | MIC2004 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Current - Output (Max) | 1.2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70mOhm |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2004-1.2YM5-TR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in SC-74A, SOT-753.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.The maximum output voltage is P-Channel volts.There are Load Discharge features available on the LED driving board.As you can see, it comes from the MIC2004 family.It is necessary to use the 5 pins in order to operate the LED driver.1.2AV is the maximum output of the LED driver.The maximum output current must drop to 1.2A to meet the operation criteria.It is positioned in the direction of Surface Mount.Currently, the LED driving board has 70mOhm resistance.There are a total of 1 available channels.Its maximum input voltage is 5.5V volts.Input voltage must be at least 2.5V volts.A maximum operating temperature of 85°C°C is required to provide stable operation.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.
MIC2004-1.2YM5-TR Features
Resistance of 70mOhm
1 channels
MIC2004-1.2YM5-TR Applications
There are a lot of Microchip Technology MIC2004-1.2YM5-TR Power Switches ICs applications.
- Solid State Drivers
- Wireless Modem Data Cards
- USB Protection
- Wireless Headsets
- Hard Disk Drives
- Handheld Devices
- Set-top-box
- Smart Phones, Feature Phones
- Hot Swaps
- Hot Swap
