MIC2005-0.5YM6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 70mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 500mA |
| Base Part Number | MIC2005 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 330μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70mOhm |
| Height | 1.3mm |
| Length | 2.9mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2005-0.5YM6-TR Overview
It is packaged in the form of a Tape & Reel (TR).There is a package for it in the SOT-23-6 package.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts has been specified.In terms of features, the LED driving board has Slew Rate Controlled.It is a member of the MIC2005 family.The operation is carried out using the 6 pins.In this case, the LED driving board can produce only 500mAV as its maximum output.To meet the operation criteria, the maximum output current drops to 500mA.In this case, it is mounted in the way of Surface Mount.It has a resistance of 70mOhm.This LED driver can handle voltages up to 5.5V volts.The input voltage minimum is 2.5V volts.Keeping the operating temperature at 85°C°C ensures stable operation.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.There is a maximum supply voltage of 5.5VV that it is capable of handling.It can also be used at 2.5Vvolts if needed.
MIC2005-0.5YM6-TR Features
Resistance of 70mOhm
MIC2005-0.5YM6-TR Applications
There are a lot of Microchip Technology MIC2005-0.5YM6-TR Power Switches ICs applications.
- Telecom and Network Systems
- Handheld Devices
- PC Card Hot Swap
- Smart Phones, Feature Phones
- USB Power Distribution
- Portable GPS
- Hot Swap
- Notebook PC
- PC Cards
- Hot Swap
